Aritco 6000
Aritco 6000
Aritco 6000
Faceplate panel
The faceplate panel in anodized aluminum (chemically polished) gives a soft finish to the platform. To prevent any trapping, a safety list is mounted behind the faceplate panel which cuts off the security circuit when pressed down.
Alarm button
Alarm button A standard alarm button is always delivered with the lift. When it is pressed a buzzer sounds. This is only a signal to the user that the button is pressed. The alarm button may be connected to an external alarm sounder or an autodialer.
Destination buttons
Destination button with background lit frame, which indicates when the button is pressed down (green light). There are no signs on the destination buttons, instead it is possible to have your own text above the destination buttons on the destination panel
Emergency stop button
Button in “mushroom” type for emergency situations. Is always included as standard
Key switch on platform
Key switch placed on destination panel. The key switch locks the platform functions and prohibits unauthorized use. One key switch per platform can be provided. The key switch can be serial connected to all destination buttons or the key switch is connected to one destination button. Two brands to choose from:
• ASSA (Nordic markets only). Aritco only delivers the housing, Aritco does not deliver the locking cylinder.
• Telemecanique Can be ordered as option.
Half height wall
The platform is in its basic execution delivered with a side wall (half height) including the destination panel. Panels under the control panel are painted in RAL 7042 (grey) as standard, but can be painted in any RAL colour as an option. For lifts with an open shaft, half height doors or when cost must be kept down. Height 1000 mm.
Full height wall - New
To get a conventional lift feeling the Aritco 6000 can be delivered with a full height wall (2100 mm high). The full height wall has a big mirror that goes along the whole machine side. This gives the lift a nice look, for the home market. The light in the full height wall is a LED light that is hidden behind the mirror. Panels under the destination panel are painted in RAL 7042 (grey)
as standard, but can be painted in any RAL color as an option. When ordering a full height wall for platform 900x1040 mm., the electric must be external
Mirror
Mirror that goes along the whole machine side and that has an integrated LED light. Included as standard for full height wall.
Fold down seat
In solid birch and with chromed brackets. The seat has to be folded back manually after use. Can be ordered as an option. Size: 320 x 400 mm. Not available for 900x1040 mm.
as standard, but can be painted in any RAL color as an option. When ordering a full height wall for platform 900x1040 mm., the electric must be external
Mirror
Mirror that goes along the whole machine side and that has an integrated LED light. Included as standard for full height wall.
Fold down seat
In solid birch and with chromed brackets. The seat has to be folded back manually after use. Can be ordered as an option. Size: 320 x 400 mm. Not available for 900x1040 mm.
Autodialer
The door faceplate can be placed directly on the door frame or externally in an external call station box. The door faceplate is painted in the same colour as the door frame. Standard colour is RAL 9003 (Aritco white), if the door frame is painted in another colour the faceplate will be painted in the same colour.
Phone (optional)
The telephone work as a standard telephone but is intended for emergency calls. The phone is mounted on the platform panel. Equipped with redial memory, mute button and a lamp indicator for on/off. Can be equipped with a GSM module. Aritco does not supply SIM card.
DC converter (optional)
When more autodialers are connected in series on one phone line the power on the phone line is not enough to drive more than one autodialer. In this case, a DC-converter is needed for each lift. The DC-converter 12-24 V is used as external power supply for the autodialer.
PLATFORM LIFT
Aritco platform lift can choose open the door in 3 direction to suitable with any house in 8 side as follows
THE DOOR
The doors are made of toughened galvanized steel and laminated and toughened glass which is 8 mm thick for the full height and half height glass door, and 17.5 mm thick for the Double-hinged glass door. The default door color is RAL 9003 (Aritco white),but any other RAL color can be selected as an option. The door frame and door blade can be painted in the same color or the frame in one color and the blade in another color. For the same lift all doors must be painted in the same colour.
The door Full height
Dimensions 900x2000
Left or Right
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener or handle is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
Double-hinged (optional)
Opening Width and Height needs to be specified
RAL painted
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener and door handle is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
Haft height door (optional)
Dimensions 900x1100
Left or Right
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener and handlel is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
Left or Right
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener and handlel is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
You can choose manual door opener or automatic door according to your style.
Internal door opener
Opens and closes the door automatically. It is built into the door frame and can't be seen from the outside. Can be ordered as option. Standard for double hinged glass doors.
Internal door closer
Closes the door automatically after a preset time. It is built into the door frame and is invisible form the outside. Includes function to keep door open until the user manually closes the door. Standard for all doors except large glass doors with 50 mm frametop.
Opens and closes the door automatically. It is built into the door frame and can't be seen from the outside. Can be ordered as option. Standard for double hinged glass doors.
Internal door closer
Closes the door automatically after a preset time. It is built into the door frame and is invisible form the outside. Includes function to keep door open until the user manually closes the door. Standard for all doors except large glass doors with 50 mm frametop.
Door handle
The handle in anodized aluminum with a straight shape as standard. Available in stainless steel as an option. Note that the door handle on a door on B-side of an Aritco 6000 could hit the building wall if the lift is installed very close to the wall on A or C side. This is since the door on the B-side does not have a door frame.
Door faceplate
The door faceplate can be placed directly on the door frame or externally in an external call station box. The door faceplate is painted in the same colour as the door frame. Standard colour is RAL 9003 (Aritco white), if the door frame is painted in another colour the faceplate will be painted in the same colour.
Remote control
A remote control is connected to the destination buttons on the platform. Instead of pressing the destination button on the platform the button on the remote control can be pressed (hold to run). Remote control with 2 to 6 buttons, with numbers 2-6. One remote control per lift. One receiver per two floors. Can be ordered as an option.
Numeric Key Lock (optional)
The mumeric key lock can be used to add simple security without a key. The numeric code can be programed from 4 digits to 10 digits and can be re-coded anytime. It can be ordered as options by replacing the call buttons or the destination buttons.
Landing indicator (optional)
Digital display positioned at the door frame. It shows which floor the lift is on at the moment. The landing indication can also show following system information:
• Warning if the lift batteries are low.
• A bell when the alarm button has been pressed.
• Number of starts and total run time since installation or since last reset.
• A weight symbol will appear if the lift is overloaded.
• If connected to the buildings fire alarm a "Fire" symbol will be shown when alarm is activated.
Threshold and ramp.
Threshold and ramp For all lifts without a pit a door threshold in oak is delivered with the lift. A ramp can be delivered together with the door threshold for easier access to the lift. The ramp is made of galvanized steel, painted in RAL 9003 (Aritco white) as standard. If the shaft is painted in another RAL colour the ramp will be painted in the same colour. Can be ordered as an option. It is also possible to order the threshold plates in corrugated aluminum instead of oak. In this case a ramp in galvanized steel covered with corrugated aluminum can be ordered as an option for lifts without a pit. A threshold will not be delivered in this case. Door - Aritco 4000 and Aritco 6000 Cover plate If the door control is placed externally and not on the door frame a cover plate that covers the hole in the door frame is delivered with the lift. The cover plate is always delivered with the lift in the same colour as the door frame. Standard colour is RAL 9003 (Aritco white).
Arrival gong (optional)
The arrival gong gives an audible signal (ding dong) when the platform arrives at each landing. It is placed in the door frame on each landing. Can be ordered as an option.
Screw and Drive nut
Roll pressed steel – guarantees the quality The nut is turning – not the screw Safety: 8 times the maximum load. Self locking concept. No additional motor brake is necessary. Vibration reduction due to a patented nut design. If maintained correctly, no oil waste due to our lubrification system 40 mm screw
Power supply
3-phase 400V / 5.2 A / 16 A slow
• Standard for all lifts (50 Hz)
• Frequency 50 or 60 Hz
• Frequency converter, with build in soft start and stop
(option).
1-phase 230V / 9 A / 16 A slow
• Option when building doesn´t support 400V 3-phase
• Frequency converter, with built in soft start and stop
• Frequency 50 or 60 Hz
3-phase 230V / 9 A / 16 A slow
• Option
• Note that this is rarely used except for example in Norway
and Saudi Arabia
• Frequency 50 or 60 Hz
Lubrication The screw must be oiled at regular intervals.
Manual Lubrication. A brush fixed to the platform oils the screw when using the lift (a tray with lubrication oil in the bottom of the shaft). Standard for Aritco 7000. Automatic Lubrication. Oils the driving screw at regulated time intervals even if the lift is not in use. The lubrication frequency is adjustable. Standard for Aritco 9000. Option for Aritco 7000. Standard for lifts with a travel height of over 8000 mm. Recommended for lifts that are seldom used or that are not used regularly to travel from ground to top floor
Battery operated emergency lowering
All Aritco lifts have battery operated emergency lowering as standard. You can lower yourself from inside the lift and get out by yourself when there is a power failure. Possible to run the lift to nearest level from the platform/cabin (possible to go down)
- Executed when pressing a platform/cabin button. Can also be run externally from the call button (hold to run) or service box.
SHAFT
The lift is always delivered with a self supporting shaft. The lift always comes with cladding panels on the inside of the shaft on the machine side. If the lift is not installed against a wall, machine side cladding can be added on the outside of the lift to cover the machine side. For all sides except for the machine side you can choose to have shaft panels in steel or glass. The top height of the shaft for Aritco 7000 is not fixed. When having a standard door on the top floor, the minimum top height depends on the door opening height and the frame height. For a door opening height of 2000 mm the standard frame height is 2 240 mm, which is the lowest top height. Higher top height can be ordered.
จุดเด่นที่ทำให้อาริทโก้เเตกต่าง
- Up to 13 m travel height with maximum of 6 stops
- Most efficient space utilization
- Choices of panoramic glass or solid shaft panel on three sides
- Compliance with European safety standards and regulations
- Patented screw drive system to ensure owner's safety and comfort.
- Simple, compact and easy to install (less than 1 week) anywhere - indoor/outdoor
- Require little or no modification to existing building
- Up to 11 available platform sizes
- Only 21.5cm thick mechanical shaft
- Only 1500 watts to operate the lift, 10 watts when standby
- Built-in back up electrical and mechanical lowering systems in case of power failure
- No separate machine room or special built structure needed
- Built-in 5 emergency stops system to ensure extra safety.
- No extra head room or pit required
- Most efficient space utilization
- Choices of panoramic glass or solid shaft panel on three sides
- Compliance with European safety standards and regulations
- Patented screw drive system to ensure owner's safety and comfort.
- Simple, compact and easy to install (less than 1 week) anywhere - indoor/outdoor
- Require little or no modification to existing building
- Up to 11 available platform sizes
- Only 21.5cm thick mechanical shaft
- Only 1500 watts to operate the lift, 10 watts when standby
- Built-in back up electrical and mechanical lowering systems in case of power failure
- No separate machine room or special built structure needed
- Built-in 5 emergency stops system to ensure extra safety.
- No extra head room or pit required
Flooring
Vinyl, rubber or simply no flooring at all. Choose between following options:
Standard:
Standard:
Option:
Paint color
Standard wall laminate for machine side is black with small embossed dots. For the other walls, where there are no doors standard laminate is white grey. As an option you can chose from a range of different laminates in different colours. Choose the same colour for all cabin walls or choose one colour for the machine side and another colour for the remaining walls.
